825mm Effect Width Metal Corrugated Roof Sheet Tile Roll Forming Machine

Part 1: Decoiler

Work type: Passive type, Expand and shrink manually

Structure： Steel channel welded for the basic frame

Usage： To support the coil and facilitate uncoiling, the forklift or overhead crane carries the coil on dthe ecoiler

Loading capacity: 5 tons (11,000 pounds)

Inner diameter: 450-550mm (manual adjustment)

Part 2: Guide feeding device with leveling and cutting

Advantage:

1.  With several support rollers,  to  feed the material more smoothly
2.  Equipped  with  two pinch plates to feed  the  material, prevent the material surface from being damaged, and feed the material more easily and quickly
3.  With handwheels to adjust the feeding size,  more convenient.
4.   Upper and lower layers with a manual cutter to cut feed material more easily.
5.   Upper layer and lower layer with two gears on the outside, so that the upper axis of each layer runs from passive to active, with more power and faster.

Item	Specification
Product Name	825-63-18 Arc Roofing Sheet Roll Forming Machine
Raw Material Input Width	1000 mm
Finished Panel Material	Standard Color-Coated Steel Sheet
Sheet Thickness Range	0.3 – 0.8 mm
Forming Speed	Approx. 10 m/min
Number of Forming Stations	18 Stations
Shaft Diameter	70 mm
Middle Plate Thickness	14 mm
Chain Size	1 inch (25.4 mm)
Roller Treatment	Precision-machined rollers with chrome-plated surface
Main Motor Power	5.5 kW with planetary gear reducer
Machine Frame	350# H-Beam Welded Frame
Cutting System	Post-cut with guide pillar cutting structure
Control System	PLC with length and quantity control
PLC & Inverter Brand	Taiwan DELTA (PLC and inverter)
Electrical Components	CHINT or DELIXI
Manual Uncoiler	1 set, standard passive type
Output Support Tables	2 sets of 3-meter-long manual receiving tables

Advantages of the spacers and rollers

For our rollers, spacers, and shafts, we all mark numbers on them, which is very convenient for you to maintain the machine in the future. Thereisball bearings inside the rollers, to make all the rollers run at the same speed when the machine is running. Because the rollers inside have ball bearings, our rollers are bigger than others, so the work speed is faster.

All rollers and spacers we do with a 0.03mm thickness chrome coating, to increase hardness and anti-rust. Some factories may use 0.01-0.02mm chrome coating.